Services

Commercial

	Industrial Process Water Chillers
	Industrial Process Cooling Towers
	Industrial Comfort Control and Heating Equipment
	Exhaust and Make-Up Air Systems
	Portable Water Heating Systems
	Commercial Comfort Cooling and Heating Systems
	Air Purification Systems

ROOF TOP EQUIPMENT MAINTENANCE**

GAS HEATING SYSTEM

UNITARY AIR CONDITIONING

Heat exchanger inspection Condenser coil inspection

Burner inspection and cleaning Blower wheels and fan inspection

Thermocouple checked/adjusted Refrigerant checked for charge and leaks

Fan switch checked/adjusted Exposed duct work checked for leaks and insulation

Pilot orifice cleaned/adjusted Belt and pulley inspection

Safety control operation inspection Thermostats checked/calibrated

Blower wheel and fan inspection Motor and bearing inspection and lubrication

Blower belt inspection Controls and safeties inspection

Blower bearing inspection and lubrication Condensation drain inspection

Motor cleaning and lubrication Crankcase heater inspection

Gas line leak inspection Relays and contacts inspection

Flue pipe inspection Unit wiring electrical disconnect inspection

Exhaust system inspection Economizer operation inspection

All parts properly secured Temperatures/pressures inspected and recorded

Air filter replacement Air filter replacement

Temperatures and performance recorded Condenser coils chemically cleaned

Thermostat inspected and calibrated

** INSPECTION REPORT PROVIDED

PLAN A
Yearly Maintenance and Repairs

PLAN B
Yearly Maintenance and 10% Discount on Repairs

Covers parts and labor on:
Gas furnace or boiler
Gas furnace with air conditioning
Heat pump
Extra Charge for:
     Humidifiers
     Electronic air cleaner
     Standard hot water heater
     Power vent hot water heater Covers:
Gas furnace or boiler
Gas furnace with air conditioning
Heat pump
Humidifiers
Electronic air cleaner
Standard hot water heater
Power vent hot water heater

Yearly Servicing includes:

HEATING	COOLING AND HEAT PUMP
Check thermostat operation	Check thermostat operation
Check ignition flame	Clean outdoor coil
Visually inspect the vent system	Check and record refrigerant pressures
Clean burner compartment	Check and record compressor volts/amps
Checking limit safety controls	Check system for drainage
Check filters	Visually inspect indoor coil
Check pilot and pilot safety control	Check and record internal duct temperature
Inspect blower and motor operation	Inspect blower
Visually inspect wiring	Visually inspect wiring
Oil motor (s)
Check and clean flame sensor
Perform Carbon Monoxide test